Iron Bird Test Engineer
Career Page • Tokamachi, Japan
Salary: JPY 6,850,000 - 13,000,000 / year
**Role & seniority: ** Experienced Iron Bird Test Engineer (5+ years), Test Group / Test Director responsibilities
**Stack/tools: **
-
HIL/Iron Bird test: hardware-in-the-loop, failure injection, fault isolation
-
Instrumentation/DAQ: sensors, data acquisition systems
-
Vehicle networks: CAN/CANalyzer; data buses such as ARINC 429, Ethernet, RS-485 (preferred)
-
Real-time platforms (nice): LabVIEW, VeriStand, dSPACE/SCALEXIO
-
Automation (nice): Python, MATLAB, VBA; test management Polarion/DOORS
-
Top 3 responsibilities:
-
Plan, write, and execute integrated system-level verification tests on Iron Bird + upgraded HILS, covering flight controls, electric propulsion, HV battery/power distribution, avionics.
-
Support Iron Bird build-up/commissioning and configuration control so the rig matches aircraft design changes; specify instrumentation/harness/DAQ improvements.
-
Lead test campaigns (test readiness reviews, run test execution), perform degraded-mode/fault injection safely, analyze results, correlate with models/simulation, and drive RCA/CAPA with teams/suppliers.
-
-
Must-have skills:
-
Hands-on experience testing on an Iron Bird/full-scale integration rig (or equivalent); 5+ years
-
HIL testing experience including failure injection + fault isolation in integrated systems
-
Instrumentation + DAQ competence
-
CAN/CANalyzer (
-
Full Description
We're building the future of air mobility and need an experienced Iron Bird Test Engineer to join our Test Group. The Iron Bird is our full-scale ground integration rig, where the eVTOL's real flight control, propulsion, high-voltage power and avionics hardware run together before they ever reach the aircraft.
On our first prototype, too much integration testing happened directly on the aircraft. For SD-05-01 we are building a proper Iron Bird and upgraded HILS rigs to catch system and supplier issues on the ground first. You will plan and run those integrated test campaigns, and your results will directly support safety-of-flight decisions and certification.
Work Location: Toyota Base (Aichi, Japan)
What You'll Do
Support Iron Bird build-up and commissioning: verify that the rig represents the aircraft (harnesses, actuators, motors, battery, avionics and loads), and keep it aligned as the aircraft design changes. Plan, write and execute system-level integration and verification tests on the Iron Bird and HILS rigs, covering flight controls, electric propulsion (motors and ESCs), high-voltage battery and power distribution, and avionics. Write test plans, formal test procedures, pass/fail criteria and test-specific risk assessments for each Iron Bird test phase.
Lead Iron Bird test campaigns as Test Director: run test readiness reviews, brief the test team and control test execution on the rig. Run failure-injection, fault-isolation and degraded-mode tests (motor, battery, actuator, sensor and data bus failures) safely on the rig. Commission supplier equipment on the Iron Bird, and coordinate acceptance and integration testing with suppliers. Maintain configuration control of Iron Bird hardware, software and calibration records, and validate software releases on the rig before they are cleared for the flight test vehicles. Specify and improve rig equipment, instrumentation, harnesses and data acquisition, working with the test rig design team. Monitor tests in real time, analyse the data, and correlate Iron Bird results with simulation models and aircraft data to keep the rig credible. Write clear test reports and drive root cause and corrective action with engineers and suppliers to close issues before they reach the aircraft. Support certification activities, including requirements-based verification and Iron Bird tests witnessed by the authorities. Develop tools and processes for safe, fast and repeatable rig testing, including test automation where it pays off.
Essential Skills
What We're Looking For
Bachelor's degree in Aerospace, Electrical, Mechanical or Systems Engineering, or equivalent experience. 5+ years of hands-on experience testing on an Iron Bird or full-scale system integration rig (aircraft, helicopter, eVTOL or flight control integration rigs preferred; automotive EV or rail HIL also considered). Experience developing and executing hardware-in-the-loop (HIL) tests, including failure injection and fault isolation in integrated systems. Experience with instrumentation, sensors and data acquisition systems. Experience with vehicle networks and tools such as CAN and CANalyzer. Experience writing test plans, procedures and reports.
Desirable Skills
Experience with high-voltage power electronics, batteries or electric motors, and high-voltage safety practices. Experience with fly-by-wire flight control system testing. Experience with LabVIEW, VeriStand, dSPACE (e.g. SCALEXIO) or similar real-time test platforms. Scripting for test automation and data analysis (Python, MATLAB, VBA). Knowledge of aircraft data buses (ARINC 429, Ethernet, RS-485). Familiarity with ARP4754A, DO-178C or DO-160 and requirements-based testing. Experience with requirements and test management tools (Polarion, DOORS or similar). Experience designing test harnesses, or a background in circuit design or embedded software. A valid driver's license.
Skills For Collaborative Success
A safety-first mindset with the confidence to stop a test. Curious and tenacious when chasing down difficult integration problems. Clear communicator who can work across flight controls, power, avionics, suppliers and the flight test team. Comfortable in a multicultural, multilingual team (interpretation support is provided; Japanese is not required). Proactive and self-driven in a fast-moving startup environment.
Why You Should Join Us
This isn't just a test job; it's a chance to build the foundation our aircraft flies on.
Make a Substantial Impact: You will shape how the Iron Bird is used and decide what is ready to go to the aircraft.
Gain Unique Expertise: Work hands-on with eVTOL flight controls, electric propulsion and high-voltage systems, all integrated in one rig.
Be a Pioneer: Join a passionate, international team taking a new aircraft from the ground rig to first flight.
Type of Employment
Permanent Employee or Contract Employee
Probationary period: 3~6 month
Place of Employment
Toyota Test Field - Asuke, Toyota City, Aichi Prefecture
Measures to Prevent Secondhand Smoke: Not Available
Scope of Change: Places determined by the Company (including places where telework is performed) Working Hours
Flextime or Discretionary labor system
In the case of flextime: No core time
Discretionary Labor System: Specialized Class Deemed working hours per day: 10 hours
Basic working hours: Start 9:00 End 18:00(Including 1hour break time)
Overtime Work: Available Holidays
115 days off per year(Saturday / Sundays / New year holidays(12/29~1/3) / Company designated holidays) Annual paid leave Refresh leave (Granted after 1, 3, 4, 5 years of service)
Salary
Estimated Annual Salary: JPY 6,850,000- JPY 13,000,000
Monthly Salary: JPY 571,000 - JPY 1,084,000 Includes fixed overtime pay for 45 hours, amounting to JPY 197,680 - JPY 375,239 Additional overtime pay will be provided for hours exceeding the fixed overtime. To be determined based on skills, experience, and abilities Expenses
Commuting allowance, business trip allowance, moving allowance, etc. Relocation Packages There are some conditions.
Social Insurance
Health insurance Employee pension (according to Japan standards) Employment insurance Worker’s accident compensation insurance
Scope of Work Change
Reassignment may occur to any other work.