
Verification Manager
CONSTELLI • Bengaluru, Karnataka, India
-
Role & seniority
- Lead / senior IV&V (Independent Verification & Validation) Manager; builds and owns in-house IV&V function and certification evidence
-
Stack/tools
-
DO certification: DO-178C (SVP/artefacts), DO-254 (HVP/artefacts); DO-330 tool qualification; DO-331/332/333 if applicable
-
Requirements/traceability: DOORS / Polarion / Jama; traceability workflows
-
Static analysis & coverage/testing (examples): LDRA, VectorCAST, Rapita RVS, Polyspace
-
FPGA verification: VHDL/Verilog, SystemVerilog, UVM, simulators (Questa/VCS)
-
Test automation: Python or similar
-
Embedded verification: target-based testing on ARM/DSP/SoC/MPSoC, RTOS/embedded Linux; HW/SW integration; HIL rigs
-
RF test instrumentation: spectrum/signal analyzers, VNA, generators, oscilloscopes, PXI automated test systems
-
-
Top 3 responsibilities
-
Set up and lead independent IV&V organization: charter, team, independence boundaries, resourcing, program reporting
-
Plan & execute certification-aligned verification across software (DO-178C), complex hardware/FPGA (DO-254), and embedded systems with full traceability/coverage
-
Serve as certification liaison: prepare/own evidence (SVP/HVP artefacts, verification summaries), manage issues/change impacts through closure, coordinate SOI audits (CEMILAC)
-
-
Must-have skills
- Hands-on IV&V experience on one DO-178B/C and one DO-254
Full Description
About the role - This role sets up Constelli's in-house IV&V function and takes our hardware and software products through airborne certification under DO-178C and DO-254, with CEMILAC as the certifying authority.
Constelli Signals designs indigenous RF and electronic warfare systems: radar target simulators, DRFM-based EW, ELINT and software defined radio platforms. Signal processing runs on FPGAs, and AI IPs run on embedded processors. As these products move from R&D into qualified production, we need a V&V organization that is independent of design, credible to certifying authorities, and efficient enough to keep programs on schedule.
You will own V&V strategy, planning, execution and certification evidence across software, complex electronic hardware, embedded systems, RF systems and the integrated system.
Key responsibilities
Build and lead the IV&V team ▪ Define the IV&V charter, organization structure, roles and hiring plan; recruit and mentor software V&V, FPGA verification and validation, and system test engineers.
▪ Preserve independence: separate reporting, review authority and tool qualification from the development teams, as required for higher Design Assurance Levels. ▪ Plan resources, effort estimates and schedules across concurrent programs, and report V&V status, risks and metrics to program leadership.
Software V&V to DO-178C ▪ Author or own the Software Verification Plan (SVP) and contribute to the PSAC, SDP, SCMP and SQAP. ▪ Lead requirements-based testing at high-level, low-level and integration levels, including normal-range and robustness cases. ▪ Drive structural coverage analysis (statement, decision and MC/DC per DAL), data and control coupling analysis, and resolution of coverage gaps. ▪ Run reviews and analyses of requirements, design, code and test artefacts against DO 178C objectives tables (Annex A). ▪ Apply DO-330 for verification tool qualification, and DO-331/332/333 where model based, object-oriented or formal methods are used.
Hardware and FPGA V&V to DO-254 ▪ Author or own the Hardware Verification Plan (HVP) and contribute to the PHAC, HDP and HCMP.
▪ Lead requirements-based verification of FPGA and complex electronic hardware: RTL simulation, constrained-random and UVM-based testbenches, code coverage and elemental analysis. ▪ Ensure target-hardware testing on the actual device correlates with simulation results, and that functional failure path analysis is done for DAL A/B items. ▪ Verify signal-processing and communications IP (DRFM, DSP chains, interfaces) and validate them at board and system level.
Embedded systems V&V ▪ Verify embedded software and firmware on target processors (ARM, DSP, SoC/MPSoC) running RTOS or embedded Linux, including boot, drivers, BSPs and middleware.
▪ Plan and run HW/SW integration testing on target boards: timing and interrupt behaviour, resource and memory usage, worst-case execution time and fault handling. ▪ Verify interfaces and protocols such as Ethernet, PCIe, SPI, I2C, UART, MIL-STD-1553 and ARINC 429, and AI IP integration on the processor. ▪ Build hardware-in-the-loop and automated regression rigs for embedded builds.
RF systems V&V ▪ Define RF verification and validation for receivers, transmitters, synthesizers and RF front ends: gain, noise figure, sensitivity, dynamic range, phase noise, spurious and harmonic performance. ▪ Validate end-to-end RF signal chains for radar target simulation, DRFM, ELINT and SDR products, including latency, coherence, frequency agility and calibration accuracy.
▪ Specify and use RF test instrumentation: spectrum and signal analyzers, vector network analyzers, signal generators, oscilloscopes, and PXI-based automated test systems. ▪ Plan RF performance testing across temperature and environmental conditions, and support EMI/EMC qualification.
System validation and test ▪ Define system-level validation against customer and operational requirements, including HW/SW integration and environmental qualification support (MIL-STD-810, MIL-STD 461). ▪ Establish test benches, RF test setups and hardware-in-the-loop environments with the lab and operations teams.
Certification and authority liaison ▪ Act as the V&V point of contact for CEMILAC, DGAQA and customer quality agencies through Stage of Involvement (SOI) audits. ▪ Own traceability from requirements to tests, results and coverage, and deliver the Software and Hardware Accomplishment Summaries' verification evidence. ▪ Manage problem reports, change impact analysis and regression strategy through to closure.
Process, tools and continuous improvement ▪ Set up V&V processes, checklists, templates and standards aligned with Constelli's quality system and SQA.
▪ Select and, where needed, qualify tools: requirements management, traceability, static analysis, unit test and coverage, simulation, and test automation. ▪ Track defect density, coverage, review effectiveness and schedule metrics to improve quality and throughput.
Qualifications
Must have ▪ Hands-on V&V experience on at least one program certified or audited under DO 178B/C and one under DO-254, ideally at DAL A or B. ▪ Working knowledge of CEMILAC certification processes and SOI audits, or equivalent experience with FAA/EASA DERs. ▪ Strong grasp of requirements-based testing, MC/DC coverage, data/control coupling, and bidirectional traceability.
▪ FPGA verification background: VHDL/Verilog, SystemVerilog/UVM, simulators such as Questa or VCS, and correlation with on-target tests. Experience with tools such as LDRA, VectorCAST, Rapita RVS, Polyspace, DOORS/Polarion/Jama, and test automation in Python or similar.
▪ Embedded systems test experience: target-based testing of firmware and RTOS/embedded Linux software, HW/SW integration, and interface and protocol verification.
▪ RF systems test experience: RF performance characterization with lab instrumentation and automated RF test set-ups, ideally for radar, EW or communication systems. ▪ Proven record of building or leading a V&V or test team, including planning, estimation and stakeholder reporting.
Good to have ▪ Domain exposure to radar, EW, DRFM, ELINT or SDR systems, and DSP algorithms on FPGA or processors. ▪ Familiarity with ARP 4754A, ARP 4761, MIL-STD-810/461, and AS9100 quality systems. ▪ Experience verifying AI/ML components in safety-critical systems. ▪ Certifications such as ISTQB Advanced/Test Manager or formal DO-178C/DO-254 training.
Competencies and first-year outcomes We are looking for someone who holds the line on independence and evidence quality while working constructively with design teams, can explain certification trade-offs clearly to engineers, leadership and auditors, and is comfortable building processes from a blank page in a growing company.
In the first 12 months, success looks like
-
IV&V charter, team structure and hiring plan approved, with the core team onboarded.
-
Verification plans (SVP, HVP) and process templates baselined for the first certification track product.
-
Traceability, coverage and test automation toolchain selected and in use.
-
First CEMILAC SOI audit for the lead program completed with no major findings on V&V.